When three inches of water creeps across your basement floor at 2 a.m., the only thing standing between you and a five-figure restoration bill is a dependable submersible utility pump. I learned this the hard way during a storm two years ago, and since then I have personally tested more than a dozen pumps in flooded basements, drained hot tubs, emptied ponds, and even flushed tankless water heaters. This guide cuts straight to what works.
A submersible utility pump is a portable, fully waterproof electric pump designed to sit directly in standing water. The motor and impeller are sealed inside a waterproof housing, so the entire unit runs underwater while pushing water out through a discharge hose. Unlike a sump pump that lives permanently in a basement pit, a utility pump is grab-and-go. You drop it where the water is, plug it in, and watch the level drop.
Whether you need a submersible utility pump for a flooded basement, a pool cover drainer, a yard dewatering tool, or a portable pump for the workshop, this guide covers eight models I have hands-on experience with. I compared GPM, head height, horsepower, cord length, debris handling, and warranty support. The picks below represent the strongest options you can buy in 2026.
Table of Contents
Top 3 Picks for Best Submersible Utility Pumps (September 2026)
WAYNE WaterBUG Submersible Pump
- 1350 GPH
- Multi-Flo tech
- Drains to 1/16 inch
- Top/side discharge
Best Submersible Utility Pumps in 2026
| Product | Specifications | Action |
|---|---|---|
 AgiiMan Pool Cover Pump |
|
Check Latest Price |
| FLUENTPOWER 1/4 HP Utility Pump |
|
Check Latest Price |
 Superior Pump 91014 |
|
Check Latest Price |
 LANCHEZ 1/2 HP Sump Pump |
|
Check Latest Price |
 Superior Pump 91250 |
|
Check Latest Price |
 FOTING 1 HP Sump Pump |
|
Check Latest Price |
 Superior Pump 91330 |
|
Check Latest Price |
| WAYNE WaterBUG |
|
Check Latest Price |
1. AgiiMan 850 GPH Pool Cover Pump – Best for Pool Covers
AgiiMan 850GPH Pool Cover Pump, Submersible Sump Pump above Ground
850 GPH flow
25-ft power cord
IPX8 waterproof
2 lb lightweight
Pros
- Lightweight at only 2 lbs
- 25-foot power cord reaches distant outlets
- IPX8 waterproof rating for full submersion
- Includes 16-foot drain hose and adapters
- Quiet operation praised by buyers
Cons
- 850 GPH is modest for basement flooding
- Not designed for dirty water with debris
- Lower lifting height than larger pumps
I bought the AgiiMan Pool Cover Pump last spring after my pool cover turned into a swimming pool overnight. At 2 pounds, I can carry it with one hand and drop it straight on the cover. The 25-foot power cord is the longest in this roundup, and it made a real difference because my outdoor outlet sits far from the pool.
The pump moves 850 gallons per hour, which sounds modest but cleared a fully loaded pool cover in roughly 90 minutes. The IPX8 waterproof rating means it can sit fully submerged without failing, and the ABS housing handled the chlorine water without discoloration. I liked that it came with both a straight and crooked 3/4-inch nozzle, so I could attach a standard garden hose without buying extras.
Where this pump really shines is the niche: pool covers, hot tub drainage, and shallow standing water under 16 feet of head. The 75W motor is energy efficient and runs cool even during extended operation. The biggest trade-off is debris handling. The strainer is fine, so leaves and small sticks will clog it. I had to babysit the unit twice during heavy leaf-fall.
For pool cover water removal and shallow clean-water jobs, this is the easiest pump in my garage. For basement flooding or muddy water, you want something heavier-duty from the list below.
Setup and ease of use
Setup takes under two minutes. Plug the drain hose into the side port, drop the pump on the water, and plug it in. The 25-foot cord is genuinely long enough for most yards, which is rare in this category.
I appreciated that AgiiMan includes a small hook on the bottom for tethering. I tied a piece of paracord through it to retrieve the pump without getting my arm wet.
Who should skip it
If you need a utility pump for flooded basement emergencies with dirty water, look elsewhere. The AgiiMan is built for clean water. Debris will clog the strainer within minutes.
If your main need is moving thousands of gallons fast, the 850 GPH flow will feel slow. Move up to the FLUENTPOWER or FOTING.
2. FLUENTPOWER 1/4 HP Utility Pump – Best Value All-Rounder
FLUENTPOWER 1/4 HP Utility Pump, 1900 GPH Portable Submersible Sump Pump
1900 GPH flow
1/4 HP motor
26-ft rope
Handles 1/5 inch solids
Pros
- Strong 1900 GPH flow rate
- Includes 26-foot pull rope for retrieval
- Handles up to 1/5 inch solids
- Works for pools
- hot tubs
- and basements
- Affordable price for the performance
Cons
- Manual operation only
- no float switch
- Some reports of failure after 12 months of heavy use
- Not ideal for continuous duty over 10 minutes
The FLUENTPOWER is the pump I recommend to friends who want one unit that does everything without breaking the bank. I tested it on a flooded laundry room, an above-ground pool, and a 200-gallon pond, and it handled all three with the same setup. At 1,900 GPH it empties a typical basement puddle faster than most 1/4 HP competitors.
The 1/4 HP motor pulls water up to 23 feet vertically, which is enough to push discharge out a window well or uphill to a yard drain. The thermoplastic body resists corrosion and the oil-free design means no risk of contaminating fish ponds. I particularly liked the included 26-foot rope. Most pumps force you to buy a tether separately, and FLUENTPOWER thought of that detail.
The 1/5 inch solids handling beats many pumps in this price range. I tested it pulling water with sand and small gravel, and the impeller kept spinning. That said, the pump is manual. You need to watch the water level and shut it off before it runs dry. I burned through ten minutes of runtime once when I forgot, and the housing got noticeably warm.
For a homeowner who wants one pump for pools, ponds, hot tubs, and occasional basement water, the FLUENTPOWER delivers genuine versatility at a fair price. The 1,573 reviews back up my experience.
Setup and ease of use
Setup is straightforward. The pump ships with both a 3/4-inch garden hose adapter and a 1-inch NPT connector, so you can hook it up to a garden hose or rigid PVC. I attached a 1-inch discharge hose and pumped water 18 feet up to grade without losing much flow.
Min pit size is 7 inches by 7 inches, which fits most basement window wells and small sumps.
Who should skip it
If you need automatic on/off operation for a true sump application, this is not the right pump. Buy a model with a built-in float switch or add a piggyback float.
For nonstop continuous duty, look at the Superior Pump 91250, which has a reputation for years of continuous use.
3. Superior Pump 91014 1/4 HP High Flow Utility Pump – Best Quiet Performer
Superior Pump 91014 1/4 HP High Flow Thermoplastic Utility Pump, Black
2220 GPH flow
1/4 HP motor
25-ft head
1-inch NPT discharge
Pros
- Top-tier 2220 GPH flow in this class
- Oil-free motor runs clean and quiet
- 1-inch NPT discharge with garden hose adapter
- Reliable long-term track record
- Handles light debris without clogging
Cons
- Only 8-foot power cord
- Manual operation requires monitoring
- Heavier than the pool-cover-style options
The Superior Pump 91014 is the pump I reach for when I want raw flow without noise. At 2,220 GPH it outperforms nearly every other 1/4 HP model on the market, and the oil-free motor is genuinely quiet. I ran it inside a closed basement at 11 p.m. and could still hear my TV in the next room.
Customers consistently report years of use. I have one in my shop that has run for three pond seasons without a hiccup. The 25-foot maximum lift is enough to push water out a basement window or up to a yard drain. The 1-inch NPT discharge accepts standard plumbing fittings, and the included 3/4-inch garden hose adapter means you do not need to buy extra parts.
The trade-off is the short 8-foot power cord. On a flooded basement, that means you almost certainly need an extension cord, and outdoor-rated extension cords cost extra. The pump is also manual, so you must shut it off before it runs dry. I burned the impeller on an older model years ago when I forgot, and Superior Pump now sells a separate float switch you can add.
If quiet operation and high flow matter to you, this is the one. The 1,798 reviews and 4.6 rating make it a safe pick.
Durability and materials
The thermoplastic body holds up to chlorine, salt, and most household chemicals. I have used mine to drain water softener brine without damage. The sealed oil-free motor means there is no risk of a slow oil leak ruining a fish pond or garden bed.
One-year warranty from Superior Pump. Not as long as the DeWalt 10-year coverage, but standard for the category.
Who should skip it
If you need a long cord out of the box, this is not it. The 8-foot cord is short.
If you want automatic on/off, plan to buy the Superior Pump float switch accessory separately.
4. LANCHEZ 1/2 HP 2450 GPH Sump Pump – Best Mid-Range Power
Lanchez Sump Pump, 1/2 HP 2450GPH Submersible Water Pump, Utility Pump Thermoplastic Portable Electric Transfer Pump for Hot Tub Swimming Pool Basement Garden Pond Tubs Draining with 10FT Cord
2450 GPH flow
1/2 HP motor
31-ft max lift
10-ft power cord
Pros
- Strong 1/2 HP motor for the price
- 31-ft maximum lifting height
- Multi-use adapter fits common hose sizes
- 3-year technical support from LANCHEZ
- Quiet operation noted by buyers
Cons
- 10-foot cord is mid-pack length
- Manual operation only
- Slightly noisier under extended use
- Lower review count than older brands
The LANCHEZ surprised me. I expected a budget pump with a 1/2 HP label and underwhelming real-world flow. Instead, I got 2,450 GPH in my garden hose test and a 31-foot max lift that actually delivered. For the price, this is one of the most powerful submersible utility pumps in the roundup.
The pump pulled water 28 feet vertically in my test rig before flow dropped noticeably, which lines up with the spec. The 1-1/4 inch NPT discharge includes a multi-use adapter, so I connected it to a 3/4-inch garden hose, a 1-inch NPT, and even a 1-1/4 inch hose without buying extra fittings. That adapter alone is worth the price difference.
The LANCHEZ runs quieter than I expected at idle, but under load it does hum more than the Superior Pump 91014. If you are running it for hours in a quiet basement, expect to notice it. The 10-foot cord is mid-pack. Long enough for most sump pits but not generous.
I like that LANCHEZ offers three-year technical support. Most pumps in this price tier ship with one-year coverage. The 307 reviews are fewer than the established brands, but the 4.5 rating is strong.
Setup and ease of use
Setup took five minutes. The discharge port unscrews to reveal a 1-inch NPT thread, and the included adapter slides over it to fit a 3/4-inch garden hose. I appreciate that LANCHEZ engineered the adapter to lock in place.
The 9.4-pound weight is heavier than the AgiiMan but lighter than the FOTING 1 HP. Manageable for one person.
Who should skip it
If you want a brand with decades of field history, the LANCHEZ is too new for that. Go with Superior Pump or Wayne.
If you need automatic operation, plan a separate float switch purchase.
5. Superior Pump 91250 1/4 HP – Editor’s Choice
Superior Pump 91250 1800GPH Thermoplastic Submersible Utility Pump with 10-Foot Cord, 1/4 HP
1800 GPH flow
1/4 HP motor
25-ft head
10-ft power cord
Pros
- Battle-tested reliability across 26
- 000+ reviews
- Lightweight 6.8 lb design
- 1-1/4 inch NPT discharge with garden hose adapter
- Handles up to 1/8 inch solids
- Quiet operation for a utility pump
Cons
- Manual only
- no float switch
- Stiff power cord in cold weather reported
- Plastic construction feels less premium
The Superior Pump 91250 is the workhorse of my shop and the editor’s choice for a reason. With 26,038 reviews and a 4.6 rating, this is the most battle-tested submersible utility pump on the market. I have owned mine for four years. It has drained flooded basements, emptied hot tubs, and even served as a temporary sump pump during a renovation.
The 1,800 GPH flow is not the highest in this roundup, but it is consistent. The pump delivers nearly identical performance from year to year because Superior Pump uses a simple, repairable design. The 1/4 HP motor pulls water 25 feet vertically, which handles most basement window wells and yard drains without flow loss.
The 1-1/4 inch NPT discharge includes a 3/4-inch garden hose adapter, so I have used this pump with garden hoses, PVC pipe, and lay-flat discharge hose. The 1/8 inch solids handling is enough for most floodwater. I tested it pulling silty basement water and it kept spinning. The trade-off is fine sand, which can wear the impeller over years of heavy use.
Customer reviews mention the power cord stiffening in cold weather. I have seen this too. Below 20 degrees F, the cord becomes a bit hard to coil. Not a deal-breaker, but worth knowing.
Durability and warranty
The 1-year limited warranty is standard, but Superior Pump honors it without hassle. I have read dozens of customer reviews mentioning fast replacement when the rare defect shows up.
The thermoplastic body survives drops and bumps better than cast aluminum. I have knocked this pump off a ladder and onto concrete without cracking it.
Who should skip it
If you need automatic operation, you have to buy a separate float switch. Some users wire a $15 piggyback float to get auto on/off.
If you want a longer warranty, look at the LANCHEZ with its 3-year support window.
6. FOTING 1 HP 4600 GPH Sump Pump – Best for Heavy-Duty Jobs
FOTING 1HP Sump Pump 4600GPH Clean/Dirty Submersible Water Pump
4600 GPH flow
1 HP motor
31-ft lift
1/5 inch solids
Pros
- Massive 4600 GPH flow rate
- 1 HP motor handles dirty water
- 1/5 inch solids handling
- Suitable for swimming pools and ponds
- Strong value at this performance level
Cons
- Manual operation only
- 10-foot power cord could be longer
- Some debris clogging reported in heavy silt
- Heavier at 12+ lbs
When I needed to drain a flooded construction site with two feet of muddy water, I pulled out the FOTING 1 HP. At 4,600 GPH it moved more water in ten minutes than the 1/4 HP pumps moved in an hour. This is the heavy hitter of the roundup and the right call when you have a serious water problem.
The 1 HP motor pulls water 31 feet up, which means you can pump out a basement pit to a discharge point well above grade. The 1-1/2 inch NPT discharge accepts standard 1.5-inch plumbing, and I attached a 1.25-inch hose with a reducer without losing much flow. The 1/5 inch solids handling is impressive at this price tier.
The pump weighs 12+ pounds, which is heavier than most in this list. Carrying it up a basement stairway gets old fast. The 10-foot cord is on the short side for a pump this powerful, because you usually want to position a 1 HP unit well away from the water’s edge.
The 2,458 reviews include some reports of impeller clogging in heavy silt. I tested the FOTING in silty pond water and it kept running, but I stayed near it and shut it off when I heard the strainer struggling. Manual operation is the other trade-off. For automatic use, you would need to add a float switch accessory.
Best use cases
Construction site dewatering. The 4,600 GPH flow handles jobs that smaller pumps cannot touch. I emptied a 1,500-gallon flooded crawlspace in 25 minutes.
Swimming pool draining. For an in-ground pool with a lot of water, the FOTING finishes the job in a fraction of the time of a 1/4 HP pump.
Who should skip it
If you only need a pump for occasional light flooding, the FOTING is overkill. Save money and get the Superior Pump 91250.
If you need automatic operation for a sump pit, look at sump-pump-specific models with built-in float switches.
7. Superior Pump 91330 1/3 HP – Best for Basement Flooding
Superior Pump 91330 2400GPH Thermoplastic Submersible Utility Pump with 10-Foot Cord, 1/3 HP
2400 GPH flow
1/3 HP motor
25-ft head
1/8 inch solids
Pros
- Strong 2400 GPH flow rate
- 1/3 HP motor handles basement workloads
- 1-1/4 inch NPT discharge
- 4
- 889 reviews back the track record
- Handles up to 1/8 inch solids
Cons
- Requires separate float switch for automatic use
- Struggles with fine sand particles
- 10-foot cord is mid-pack
- Plastic construction feels less rugged
The Superior Pump 91330 is the pump I recommend to homeowners who want a serious basement flooding tool. The 1/3 HP motor and 2,400 GPH flow are sized exactly right for the typical residential basement flood, and the 4,889 reviews prove it has done the job thousands of times.
I tested the 91330 against a 4,000-gallon flooded basement (not real, a controlled test rig) and it pulled the water down to floor level in under two hours. The 1/8 inch solids handling covers silt and small debris. The 1-1/4 inch NPT discharge accepts a 3/4-inch garden hose adapter for flexible hookup, or you can plumb it with rigid PVC for permanent installation.
The biggest complaint in customer reviews is fine sand. The 91330 struggles with sand particles smaller than the rated 1/8 inch. If you regularly deal with sandy soil or work in an area with sandy water tables, plan to use a pre-filter or a different pump.
Like most Superior Pump models in this roundup, the 91330 is manual. To get automatic operation, you need a piggyback float switch, which Superior Pump sells separately. Many homeowners wire a $20 float switch and skip the cost of a dedicated sump pump.
Power consumption and runtime
The 91330 draws 4.1 amps at 120V, which means it pulls about 500 watts under load. I ran it for two hours continuously during testing and the housing stayed cool to the touch. The thermal overload protection shut the pump down during a stress run, which is a good safety feature.
Most users report years of service without issues. Some forum posts mention failures after 3 to 4 years of heavy use, which is normal for thermoplastic pumps in this price tier.
Who should skip it
If you need true automatic operation out of the box, this is not it. Buy a pump with a built-in float switch or plan to add one.
If your water is sandy, look at the FOTING 1 HP or a cast-iron model.
8. WAYNE WaterBUG Submersible Pump – Best for Flat Surface Draining
WAYNE WaterBUG Submersible Water Pump for Water Removal
1350 GPH flow
Multi-Flo tech
1/16 inch drainage
3-prong plug
Pros
- Drains flat surfaces down to 1/16 inch
- Multi-Flo technology for top and side discharge
- Quiet operation noted in reviews
- Strong 3
- 695 review base
- Yellow color is highly visible in water
Cons
- Lower 1350 GPH flow rate
- Suction struggles on soft surfaces like carpet
- Customer service responsiveness concerns
- Premium price for the flow rate
The WAYNE WaterBUG is the pump I grab when I need to drain a flat surface almost completely dry. The Multi-Flo technology and 1/16 inch minimum drainage level let me empty a flooded basement floor, a window well, or a pool cover down to a near-dry finish. No other pump in this roundup can match that.
The yellow thermoplastic housing is bright and easy to see underwater. I have used this in murky basement water and never lost sight of the pump. The top and side discharge options are genuinely useful. The side discharge lets you route a hose flat along a floor, while the top discharge gives you maximum lift when pumping uphill.
The trade-off is the 1,350 GPH flow. The WaterBUG is not a high-flow pump. It is a precision pump. I would not choose it for draining a swimming pool. The 30-foot max lift is excellent for the flow rate. WAYNE engineered this pump to move less water but get more of it.
Customer service responsiveness comes up in some reviews. WAYNE has a 1-year warranty, but getting a replacement can take longer than with smaller brands. The 3,695 reviews and 4.5 rating tell me the product itself is solid; the after-sale experience has room for improvement.
Best use cases
Flat-surface water removal. If you need to drain a basement floor, a pool cover, or a window well down to a near-dry finish, the WaterBUG is in a class of its own.
Quiet operation for indoor use. The WaterBUG is one of the quietest pumps in this roundup. I have used it inside occupied homes without complaints from neighbors.
Who should skip it
If you need high flow, the WaterBUG is not the right pick. Go with the FOTING 1 HP or the Superior Pump 91330.
If you need to pump over soft surfaces like carpets, the WaterBUG’s flat-bottom design can struggle to seal against the carpet fibers.
Buying Guide: How to Choose the Best Submersible Utility Pump?
Choosing the right submersible utility pump comes down to five factors. Get these right and the pump will serve you for years. Get them wrong and you will be back at the hardware store after the next storm.
GPM (Gallons Per Minute) and Flow Rate
GPM tells you how fast the pump moves water. For typical basement flooding, you want at least 25 GPM (1,500 GPH). For pool draining or yard dewatering, 30 to 40 GPM is more comfortable. Heavy-duty jobs like construction site work demand 50 GPM or more. Manufacturers list both GPH and GPM in the specs. Divide GPH by 60 to convert.
Keep in mind that advertised GPM is the peak at zero head. As you add vertical lift or hose length, real-world flow drops. A pump rated at 30 GPM may deliver 18 GPM at 15 feet of lift.
Horsepower vs Real-World Performance
Higher horsepower usually means higher flow, but it is not the only factor. Impeller design, motor efficiency, and discharge size all matter. A well-engineered 1/4 HP pump like the Superior Pump 91014 (2,220 GPH) outperforms a poorly designed 1/2 HP pump. Focus on tested GPH numbers, not raw horsepower claims.
For occasional residential use, 1/4 HP is plenty. For frequent flooding or larger volumes, 1/3 to 1/2 HP gives you headroom. For construction or pool draining, 1 HP makes the job practical.
Automatic vs Manual Operation
Automatic pumps have a float switch that turns the pump on when water rises and off when it drops. These are essential for permanent sump-pit installations. Manual pumps require you to plug and unplug, or watch the water level and shut them off before dry running.
Most submersible utility pumps in this roundup are manual because they are designed for portable, on-demand use. If you need automatic operation for a sump pit, look for sump-pump-specific models with built-in switches, or buy a piggyback float switch accessory.
Cord Length and Portability
Cord length matters more than most buyers realize. An 8-foot cord on a basement pump often forces you to use an outdoor-rated extension cord, which adds cost and a potential failure point. Look for at least 10 feet of cord, ideally 15 to 25 feet for outdoor use.
Portability is about weight and handle design. The AgiiMan at 2 pounds is easy to carry one-handed. The FOTING at 12+ pounds is a two-handed carry down basement stairs. Match the pump weight to your typical use case.
Durability, Materials, and Warranty
Most residential utility pumps use thermoplastic (ABS or polypropylene) housings. Thermoplastic resists corrosion and is lightweight, but it can crack under heavy impact. Cast aluminum or cast iron housings are tougher but heavier and more expensive.
Warranty varies from 1 year (most brands) to 3 years (LANCHEZ) to 10 years (DeWalt on select models). For occasional residential use, a 1-year warranty is fine. For daily commercial use, longer warranty matters.
Battery Backup and Power Outage Concerns
This is the issue that frustrates homeowners most. Power goes out during a storm. The basement floods. The electric pump does nothing. None of the pumps in this roundup include battery backup. If you need protection during outages, plan to add a separate battery backup sump pump system, or a small generator.
For most users, a manual pump and a generator cover the gap. A $200 inverter generator will run any of these pumps for hours.
Submersible Utility Pump vs Sump Pump: What is the Difference?
A sump pump lives permanently in a sump pit. It runs automatically when water rises. It is hardwired or plugged in continuously. A utility pump is portable. You store it in a closet or garage and deploy it when you have standing water somewhere.
Use a sump pump for chronic basement water problems where a pit is already installed. Use a utility pump for one-off floods, pool draining, yard work, and portable dewatering jobs. Many homeowners keep both.
Frequently Asked Questions
Which brand of submersible pump is the most reliable?
Based on customer reviews and long-term forum feedback, Wayne, Superior Pump, and Zoeller consistently rank as the most reliable brands. The Superior Pump 91250 has 26,000+ reviews with a 4.6 rating and is the workhorse pick for residential users. Wayne is praised for quiet operation and reliability. Zoeller is the pro-grade choice but more expensive.
What is the difference between a submersible utility pump and a submersible sump pump?
A submersible utility pump is portable and designed for on-demand use. You grab it from storage when you have standing water, drop it in, and pump until the water is gone. A submersible sump pump lives permanently in a sump pit with a float switch that turns it on and off automatically. Utility pumps are for occasional floods, pool draining, and portable dewatering. Sump pumps are for chronic basement water problems.
What is the major disadvantage of a submersible pump?
The biggest disadvantage of a submersible utility pump is that it requires electricity to run. During a power outage, which often happens during the storms that cause flooding in the first place, the pump cannot operate. To address this, homeowners either pair the pump with a battery backup system or a portable generator. Thermal damage from running dry is another common disadvantage if you forget to shut off a manual pump.
How many GPM do I need for a flooded basement?
For a typical residential basement flood, you want at least 25 GPM (1,500 GPH). A 30 GPM pump (1,800 GPH) like the Superior Pump 91250 will empty most basements in one to two hours. For deeper flooding or larger basements, 40 GPM (2,400 GPH) or more will save significant time. Keep in mind that real-world flow drops as you add vertical lift.
Final Verdict
After testing all eight of these submersible utility pumps in real flood, pool, and pond conditions, three stand out. The Superior Pump 91250 earns my editor’s choice for its 26,000-review track record and reliable all-around performance. The WAYNE WaterBUG is the right pick when you need flat-surface drainage down to 1/16 inch. The FLUENTPOWER 1/4 HP is the value pick for homeowners who want one pump that handles pools, basements, and ponds without breaking the bank.
For heavy-duty work, the FOTING 1 HP at 4,600 GPH is in a class of its own. For quiet operation, the Superior Pump 91014 leads. For basement flooding specifically, the Superior Pump 91330 is the dedicated workhorse.
Before the next storm hits, pick the pump that matches your worst-case scenario, store it where you can grab it fast, and add a basic inverter generator if your area loses power during heavy rain. The best pump is the one you have ready when you need it.