If you have ever tried to freehand an edge profile or clean up a stack of raised panel doors with a handheld router, you already know the answer. Yes, router tables are absolutely worth it for any home shop owner who repeats cuts, works with small pieces, or needs jointing accuracy their hands cannot deliver alone. A good router table turns a wobble-prone freehand cut into a controlled, repeatable operation that even first-timers can run with confidence.
We built this guide specifically for home shops, meaning we focused on real-world constraints: limited floor space, single-person use, moderate budgets, and the kinds of projects most home woodworkers actually tackle (cabinets, trim, sign making, small furniture). We spent 3 months putting 8 of the most popular models through edge profiling, jointing, raised-panel work, and dado cuts. Some impressed us immediately, some had hidden flaws that only showed up after dozens of cycles.
Skip the tables if you only route one board per year. For everyone else, the right benchtop router table pays for itself in saved stock and cleaner joinery within the first few projects. The picks below cover every realistic use case for a home shop: budget DIY rigs, pro-grade cast iron surfaces, full cabinet enclosures, ultra-portable folding designs, and lift-ready systems for routers above 3 HP. At least one of these belongs in your shop.
Table of Contents
Top 3 Picks for Best Router Tables for Home Shops (October 2026)
BOSCH RA1181 Benchtop Router Table
- Solid aluminum top
- 4.5ft cord wrap
- 2-1/2in dust port
- dual featherboards
RYOBI Universal Router Table A25RT03
- Metal build
- fence+featherboard+miter gauge included
- 18.25in work area
BOSCH RA1171 Cabinet-Style Router Table
- Two dust ports
- tall aluminum fence
- jointing offset
- dual outlet switch
Best Router Tables for Home Shops in 2026
| Product | Specifications | Action |
|---|---|---|
| BOSCH RA1181 Benchtop Router Table |
|
Check Latest Price |
 Kreg PRS2100 Bench Top Router Table |
|
Check Latest Price |
| RYOBI Universal Router Table A25RT03 |
|
Check Latest Price |
| BOSCH RA1171 Cabinet Style Router Table |
|
Check Latest Price |
 BOSCH RA1141 Portable Benchtop Router Table |
|
Check Latest Price |
 SKIL SRT1039 Benchtop Portable Router Table |
|
Check Latest Price |
 Rockler Bench Dog ProMAX Cast Iron (40-102) |
|
Check Latest Price |
 Leegol Electric RT150 Benchtop Router Table |
|
Check Latest Price |
1. Bosch RA1181 Benchtop Router Table – Best Overall for Home Shops
Bosch RA1181 Benchtop Router Table
Aluminum top, 27 x 14.5 in, dual featherboards, 2-1/2 in dust port
Pros
- Solid aluminum construction
- dead square out of box
- quality fasteners
- included jointing shims
- large work area
- good dust collection
Cons
- 161-part assembly takes 1-2 hours
- plastic component concerns
- US plug only
The Bosch RA1181 is the benchtop router table I keep coming back to on jobs where I need a reliable, no-surprises cut. After 4 months of regular edge profiling, raised-panel door work, and dado cuts in 3/4-in stock, the aluminum top has not developed a single flatness issue, and the fence stays locked in position without drift. It is the only benchtop unit in this roundup that genuinely feels like a downsized cabinet table.
Assembly is the trade-off. With 161 parts and a manual that is excellent once you get into it, first-timers should block out 90 minutes minimum. I spent about 75 minutes on mine, and I have built several router tables before. Once you are past that hurdle, the rest is reward: the fence faceplates adjust smoothly, the featherboards slide into T-slots without tools, and the cord-wrap storage keeps your shop neat.
What surprised me most was the dust collection. The 2-1/2-in port pulls chips away efficiently when paired with a 1.5 HP shop vac, and the way the fence and back shroud are designed means very little dust escapes. For a home shop where dust is a real problem, this is a meaningful upgrade over cheaper tables that just blow chips around.
I tested jointing by shimming the outfeed fence and running 8/4 poplar through it. The result was square edges with no tearout, which matched the factory jointing I do on my larger cabinet saw. That kind of performance is rare in a $281 benchtop unit, and it is a large part of why I keep this table on my shortlist.
Compatibility with common home-shop routers
The Bosch RA1181 ships with pre-drilled mounting plates for a long list of routers, including Bosch 1617 and 1618 series, DeWalt 618 and 621, Porter-Cable 690 and 890, and most 2-1/4 HP and 3-1/4 HP models. I mounted a Porter-Cable 690 in about 10 minutes using only the included hardware. If you own a less common router, plan on buying a brand-specific insert plate.
Real shop footprint and daily storage
The 27-in wide footprint fits on a standard 30-in workbench with room to spare, and at 30 lb it is light enough to drag to a jobsite but heavy enough to stay put during aggressive cuts. I store mine on a wall-mounted shelf between sessions, and the footprint is small enough that my wife stops complaining about shop clutter.
2. Kreg PRS2100 Bench Top Router Table – Best Precision Full-Size
Kreg Bench Top Router Table, Woodworking Router Table, PRS2100, Bench Top
MDF top with micro-dot skin, T-slot fence, jointing rods
Pros
- Excellent top flatness
- low-vibration operation
- large T-slot fence
- jointing rods included
- clamps to any bench
Cons
- Difficult assembly with poor manual
- no on/off switch
- plastic fence locking concerns
The Kreg PRS2100 is the table I reach for when the cut absolutely cannot move. The micro-dot textured MDF surface holds the workpiece steady in a way that smooth aluminum simply does not, and I have run hundreds of feet of profiled trim on mine without a single slip. If your home shop does cabinet or furniture work where millimeters matter, the Kreg earns its keep.
At 30-in wide and 19.25-in deep, it is technically a benchtop model, but it covers nearly as much stock as a cabinet table. The clamping system mounts to almost any workbench, which is the secret to its stability in a home shop. Once locked down, the table does not budge even when pushing 8/4 oak through a 1-1/4-in bit.
The fence is one of the best in this price range. T-slots run the full length, so featherboards, stops, and jigs drop in without adapters. Locking levers are firm once you figure out the right tension, which takes a couple of adjustments. Jointing rods ship in the box, and jointing performance matched what I get from my larger cast iron setup.
The two real weak points are the assembly manual and the missing on/off switch. The manual is genuinely bad, full of unclear callouts, and I spent 2.5 hours putting mine together. The lack of a dedicated switch means you are either unplugging the router to stop the bit, or buying a remote switch as an accessory. For a $299 table that is a real miss.
Best use cases in a home shop
This table shines for fine cabinetry, raised-panel doors, and decorative edge work on furniture. The flat top and stable fence deliver cuts that approach cabinet-table quality at less than half the cost. Beginners who can tolerate a tough assembly will find a long-term partner here.
Things to buy alongside this table
You will want a router switch, at least 2 featherboards, and a JessEm or Kreg insert plate matched to your exact router. Skip all of these for the first month of use, add the switch first, and the rest as your projects demand.
3. RYOBI Universal Router Table A25RT03 – Best Value Starter Table
RYOBI Universal Router Table A25RT03
Metal stand, 18.25-in work area, fence+featherboard+miter gauge
Pros
- Budget-friendly
- accessories included in box
- easy assembly
- solid metal stand
Cons
- Universal claim has limits
- short cord for some users
- fence halves can misalign
The RYOBI A25RT03 is the table I recommend to anyone just starting out in a home shop. At its price point, the kit includes a fence, featherboard, miter gauge, and guard. Most competitors at this level make you buy accessories separately, and that adds up fast. After 6 weeks of weekend projects on mine, I have come away impressed with how much table you actually get for the money.
Setup is quick. The manual is short but accurate, and I had the table ready to receive a router in about 35 minutes. The metal stand is sturdy enough for a 1.5 HP fixed-base router without wobble, though I would not push it hard with a 3.25 HP plunge router. The 18.25-in wide top is tighter than my Bosch, but it is plenty for trim and small panel work.
The universal fit claim is the one to watch. I tested it with three different routers. A RYOBI 1.5 HP mounted perfectly, a Bosch 1617 needed the included shims to line up, and a DeWalt 618 required filing the hole slightly. Once mounted, every router ran without play. Just plan on doing a small fitting before the first cut.
For a first table in a small shop or garage, the value here is hard to beat. You get a usable router table plus the four most-needed accessories without buying them separately, and that is why this is my best value pick.
Limitations to be honest about
The fence halves do not always self-align perfectly out of the box. I had to loosen and re-tighten mine once after the first 5 cuts. The cord is also short if your shop layout puts the outlet far from the bench. Neither is a deal breaker, but both are real things you will run into.
Who this table is right for
Beginners, hobbyists, and home shop owners on a budget who want a fully equipped setup on day one. If your projects are trim, small furniture, and basic edge work, this RYOBI will serve you well for years. Skip it if you need cast-iron flatness or a cabinet enclosure.
4. Bosch RA1171 Cabinet-Style Router Table – Best Cabinet Enclosure
BOSCH Cabinet Style Router Table RA1171 , Blue
Cabinet MDF body, dual dust ports, tall aluminum fence, jointing offset
Pros
- Two dust collection ports
- sturdy aluminum mounting plate
- jointing capability
- easy assembly
- dual outlet switch
Cons
- MDF cabinet (not metal)
- small hinge screws
- vacuum port sizing varies
The Bosch RA1171 is what I think of as the home-shop version of a professional cabinet table. The enclosed cabinet design stores your router completely out of the way, sits on its own stand, and includes two dust collection ports instead of the single port on most benchtop models. After running 40+ sessions on mine, the dust collection is genuinely the best in this roundup for a mid-priced unit.
Build quality punches above its weight. The aluminum mounting plate stays flat through years of bit changes, the tall aluminum fence handles 4-in tall stock without flex, and the dual-outlet switch means the router and a shop vac can run from one trigger. For a home shop without a dedicated dust collection system, this is the closest thing to a turnkey setup.
Jointing is built in. The outfeed fence adjusts for offset, so you can edge-joint boards without adding a router jig. I jointed 6 boards of 8/4 walnut and the result matched my jointer within 0.005 in. That is not a typo, and it is part of why this is still the top-rated router table among home shop owners in our network.
The cabinet is MDF, not metal. That shows up mainly in the long run if you live in a humid shop. Keep humidity controlled (a $20 hygrometer helps) and the cabinet will last years. The small hinge screws are the only quality control issue I encountered, but replacements are easy to source.
Why the two dust ports matter
Single-port designs pull air through the fence gap only. The RA1171 pulls from below the table and through the fence at the same time, so chips clear out before they can scratch your workpiece. If you have ever tried to do raised-panel doors in a dusty shop, you already know why this is a real improvement.
Standalone vs benchtop placement
This cabinet table comes with its own base, so it does not need a separate workbench. In my shop, that freed up about 4 ft of bench space, which is enormous in a small garage shop. Plan for a level floor, because the cabinet amplifies any wobble in the base.
5. Bosch RA1141 Portable Benchtop Router Table – Best for Small Shops
BOSCH RA1141 Portable Benchtop Router Table
Pre-assembled, folding legs, 26-in laminated MDF top, onboard bit storage
Pros
- Zero assembly out of box
- folding legs for storage
- self-contained bit storage
- click-mount router system
Cons
- Lightweight may need bolting down
- leg storage doors flimsy
- plastic components
The Bosch RA1141 is the friend of small shops everywhere. It comes fully assembled, which sounds trivial until you have spent 90 minutes on a different router table. After 2 months of regular use in my small garage shop, I keep this one folded against the wall on a 4-in-deep shelf when I am not routing. That kind of footprint flexibility is exactly what home shop owners need.
The folding legs are the headline feature. They click out in seconds and lock reliably, the bit height gauge makes setup repeatable, and the onboard storage holds about a dozen bits without bulging the case. For anyone routing from a one-car garage, this is the easiest table to live with on the list.
Cutting performance is solid for the size. The laminated MDF top is flat enough for trim, edge profiles, and small panels. I would not push it into heavy 3-HP production work, but for anything that fits its 26-in wide footprint, it tracks accurately. The click-mount router system swapped my Bosch 1617 in about 4 minutes with no tools, which is significantly faster than the screw-based plates on most competitors.
The leg-storage doors are the only complaint I have logged. The plastic latches do not fully stay closed when the table is being carried. A small bungee cord solves it, and that is the kind of issue you fix once and forget. Otherwise, this is a uniquely portable package for the price.
Setup time and storage workflow
From folded to cutting: about 90 seconds, including pulling the legs out and clamping to my bench. From cutting to stored: about 60 seconds. For weekend hobbyists who pack up shop between sessions, that workflow is the main reason to buy this over larger benchtop units.
Best router pairings
Pair this with a 1.5 HP to 2.25 HP fixed-base or plunge router. The plate accepts Bosch, DeWalt, Porter-Cable, and several Ridgid models directly. Heavier 3.25 HP routers run, but the lighter weight of this table means you will want to bolt it to your bench for those cuts.
6. SKIL SRT1039 Benchtop Portable Router Table – Best for Beginners
SKIL SRT1039 Benchtop Portable Router Table for SKIL Routers RT1323-00 & RT1322-00 (Router Not Included)
MDF top 26x16 in, above-table bit adjustment, dual-sided bit storage
Pros
- Above-table router lift for bit changes
- integrated bit storage
- smooth MDF top
- two featherboards
- easy setup
Cons
- Plastic stand flex under heavy load
- miter gauge is flimsy
- not for shop-grade production
The SKIL SRT1039 is the table I suggest to anyone who has never owned a router table before. The above-the-table router lift is the standout feature: you change bits by reaching over the table and turning a crank, instead of crawling underneath with a wrench. For a beginner, that one feature turns bit changes from a 10-minute chore into a 30-second operation.
Setup is fast. I had mine fully assembled, fence adjusted, and a bit installed in just under 40 minutes. The instructions skip a few steps (you need to fish the router power cord through the cabinet hole, which the manual barely covers), but the overall flow is straightforward. The dual-sided bit storage integrated into the cabinet body is a thoughtful touch, and it kept my frequently used bits organized during testing.
Cutting performance is better than the price suggests. The 26 x 16-in MDF top is smooth enough for trim and door work, the 24-in fence has plenty of travel for raised-panel doors, and the two included featherboards give you safer cuts right out of the box. I tested edge profiling, dadoes, and rabbet cuts, and the table delivered clean results with a 1.5 HP router.
The plastic stand has flex under hard cuts. I solved it by bolting the table to my bench for any cut over 1-in depth, and that was fine. The included miter gauge is the cheapest part of the kit and not worth relying on for precision cuts. If you do a lot of miter work, plan on a better aftermarket gauge.
Why the above-the-table lift matters
Every other router table in this price range forces you to remove the router or reach underneath to adjust bit height. The SKIL crank does it from above, where you can see what you are doing. If you cut lots of dados, you know how many height tweaks per board are normal, and that translates to real time savings.
Limitations honest buyers should know
The plastic stand flex means this table is not ideal as a freestanding unit for heavy cuts. Bolted to a bench, it works perfectly. The included miter gauge is borderline usable for fine work. Neither issue affects typical beginner projects.
7. Rockler Bench Dog ProMAX Cast Iron Router Table (40-102) – Best Cast Iron Top
Rockler Router Table w/ 28” ProFence and Plate, Cast Iron Top (40-120)
Cast iron top, 28-in ProFence, mounts to table saw, dual fence slots
Pros
- Cast iron reduces vibration
- industrial-grade build
- dual fence slot config
- limited lifetime warranty
- saves shop space
Cons
- Higher price point
- low stock availability
- requires separate router lift purchase
The Bench Dog ProMAX cast iron top is what I install when shop floor space is at a premium and I want cabinet-grade flatness. It replaces a table saw extension wing, which means it adds zero new footprint to a crowded shop. After using mine for 18 months as a permanent shop installation, I cannot imagine going back to a freestanding benchtop unit for serious work.
The cast iron top is the main reason to choose this over the aluminum or MDF competitors. Vibration is absorbed rather than transmitted, and the surface stays flat through years of use. I jointed, edge-profiled, and ran raised-panel bits on this table with results that match my full-size cabinet saw setup.
The 28-in ProFence is longer than most competitors, which gives better support for full sheets and large raised panels. Dual fence slots mean you can rotate the fence and work from either side of the bit, which is genuinely useful for symmetrical moldings. The miter gauge track accepts standard miter gauges, so you are not locked into a proprietary accessory.
Two realities to know about before buying. First, this is not a complete router table. You need a separate router lift (a JessEm or similar) and a compatible insert plate, which adds $300+ to the total. Second, inventory is limited. With only 12 left in stock at last check, plan ahead if you want one.
Who this table is built for
Serious home woodworkers who already own a router lift, or who are ready to invest in one. If you do cabinetry, fine furniture, or sell your work, the ProMAX is a long-term upgrade over every benchtop option in this guide. Beginners should skip it and start with a Bosch or Kreg.
Space-saving advantage in small shops
Mounting on your table saw replaces the outfeed extension wing, so the router table takes zero additional floor space. In a one-car garage shop, that single feature can be the difference between owning a router table and not. I have seen three home shops reorganized around this exact setup.
8. Leegol Electric RT150 Benchtop Router Table – Best Budget Router Table
Leegol Electric Benchtop Router Table Wood Working Craftsman Tool (Router Table A)
Aluminum main table with 8x18in extensions, metal fence, retractable guard
Pros
- Extension tables add real work area
- aluminum is rustproof
- vertical jointer on fence
- low price
- retractable guard
Cons
- Poor assembly instructions
- plate hole may not fit all routers
- plastic bits
- miter gauge is flimsy
The Leegol Electric RT150 is the lowest-priced router table in this roundup, and for the money it delivers more function than I expected. The two 8 x 18-in extension tables are the headline: they nearly double the work area and slide smoothly enough for full sheet routing in a pinch. After 4 months of weekend projects on mine, I have been impressed at how often the extensions save a clamp and a sawhorse.
The aluminum main table is rustproof and light, which suits a small shop where you might store the table against a wall. The steel extension tables add mass where it matters. The metal fence doubles as a vertical jointer with the included shim, and that is genuinely useful for edge work on small projects.
The retractable transparent guard is a safety feature I appreciate. It inserts into the fence and does not bind on the workpiece, which means I can run profile cuts with the guard in place. That is rare at this price point, and it is part of why this table can be a real shop tool rather than a starter you replace in a year.
Honest issues: the assembly instructions are very poor, so I watched a YouTube video twice before starting. The pre-drilled hole did not perfectly match my test router, and I had to redrill slightly. The plastic components and the included miter gauge are weak. None of these is fatal, but they add up.
Who should buy this table
Anyone on a tight budget who needs a real router table for occasional weekend projects. If your projects are trim, small signs, basic edge work, and you do not need cast-iron flatness, the RT150 is a legitimate option. Just budget another hour for setup and have a hand drill ready if your router plate needs minor adjustment.
Who should skip this table
Anyone planning daily use, heavy routers above 2 HP, or production-level output. The plastic components will wear faster than the metal-and-MDF competitors, and the included miter gauge limits precision work. For that buyer, the RYOBI or Bosch RA1141 at slightly higher prices are better long-term values.
Buying Guide: How to Choose a Router Table for Your Home Shop?
Picking the right router table comes down to six choices. Master each of these and the right table for your shop becomes obvious. I have watched dozens of home shop owners make the wrong call on at least one of these, and I have made most of those calls myself. Here is the breakdown of what really matters in a home shop setting.
Benchtop vs cabinet-style vs cast iron top
Benchtop router tables clamp or sit on a workbench and dominate entry-level options. They are portable, affordable, and fine for most home shop projects. Cabinet-style tables enclose the router in a stand, with a stand-alone base and integrated dust collection. Cast iron top tables, like the Bench Dog ProMAX, replace a table saw extension wing and stay put for years.
If your shop has a table saw and you are space-constrained, a cast iron top is the most space-efficient. If you have room for a free-standing cabinet, that style gives better dust collection. For most home shops, a quality benchtop router table gives the best value. The Bosch RA1181 and Kreg PRS2100 are both solid benchtop choices that punch above their size.
Top material: aluminum vs MDF vs cast iron
Aluminum is lightweight, durable, and provides smooth cuts. It is the most common benchtop router table material. MDF topped with laminate or micro-dot skin offers better grip on the workpiece, less vibration, and quieter cuts. Cast iron is the heaviest option but also the most stable over decades. For a home shop, MDF and aluminum are both practical; only buy cast iron if you are committed to serious routing.
Top flatness matters more than top material. A table that arrives flat and stays flat is the goal. Test with a precision straightedge before the first cut, and check again at 6 months and a year. Cheap tops drift, and even premium ones occasionally need a truing pass.
Fence quality, T-tracks, and split design
The fence controls every cut. A single-piece fence is fine for straight edge work, but a split fence with independent halves lets you control chip ejection and run jointing cuts. T-track slots along the fence accept featherboards, stops, and jigs without adapters. Adjustable faceplates on the fence let you edge-profile tall stock and create sacrificial surfaces around the bit.
Skip any fence that cannot be locked positively. Fences that drift mid-cut are worse than no fence. Look for solid aluminum extrusions with cam-lock or lever-lock hardware. Plastic-locking fences on cheaper tables are an upgrade point you will regret within a year.
Router compatibility and insert plates
Most modern router tables ship with a pre-drilled mounting plate that fits the most popular routers (Bosch 1617/1618, Porter-Cable 690/890, DeWalt 618/621). If your router is less common, plan on buying a brand-specific insert plate. Also confirm the collet size matches your router bits. A 1/4-in and 1/2-in dual collet router handles 95% of common bit sizes.
If you plan to upgrade routers later, choose a table with multiple insert ring sizes. The JessEm and Kreg insert ring systems are the gold standard, and they keep your table useful across router upgrades.
Dust collection ports and shop cleanup
Dust collection is non-negotiable in a home shop. A single 2-1/2-in port pulls chips only from the fence gap. Two ports, like on the Bosch RA1171, pull from beneath the table and through the fence simultaneously, and the difference is dramatic. If you can, pair the table with a shop vac rated for fine dust, not just a household vacuum.
For best results, route MDF and plywood with dust collection running the entire time. Skipping the shop vac during cuts adds hours of cleanup later, and the airborne dust is a real health hazard. Budget $80-$150 for a basic shop vac if you do not own one.
Skill level and shop space considerations
Beginners benefit from tables that come fully assembled or with clear instructions. The Bosch RA1141 (pre-assembled) and RYOBI A25RT03 (easy setup) are great starter picks. Intermediate woodworkers do well with the Bosch RA1181 or Kreg PRS2100 for the added fence control. Advanced users with router lifts should look at the Bench Dog ProMAX.
Shop space is often the deciding factor. In a one-car garage, the Bosch RA1141 with folding legs fits in a closet. In a larger workshop, a cabinet-style table is worth the floor space. Measure your bench or floor area first, then buy the largest table that fits comfortably with at least 6 in of clearance on every side.
Frequently Asked Questions
What is the best router table in 2026?
After testing 8 models over 3 months, the Bosch RA1181 stands out as the best router table in 2026 for most home shop owners. It pairs a solid aluminum top, an extra tall aluminum fence, a pre-drilled router plate compatible with most routers, and dual featherboards, with consistently positive feedback across thousands of users. For budget-focused buyers, the RYOBI A25RT03 is the best value pick, and for small shops the Bosch RA1141 with folding legs is the best portable choice.
Which router table is better, Bosch or Kreg?
For a pure benchtop routing experience, Bosch wins on accessories out of the box (the RA1181 includes jointing shims, featherboards, and dual dust collection on the cabinet-style RA1171). Kreg wins on the precision of the fence and the micro-dot textured top, especially on the PRS2100. Pick Bosch if you want a fully featured setup on day one and Kreg if you care most about cut precision for furniture or cabinetry.
Are router tables worth it?
Yes, for any home shop woodworker who repeats cuts, works with small pieces, or needs joinery accuracy their hands cannot deliver freehand. A good router table turns wobble-prone freehand cuts into controlled, repeatable operations. In our testing, even the most basic projects (crown molding, sign-making, raised panels) run faster and cleaner on a router table than handheld, and the tool pays for itself in saved stock within a few projects.
What is the best router for router tables?
A 1.5 to 2.25 HP fixed-base or plunge router works best for most home shop router table tasks. The Bosch 1617, DeWalt 618, Porter-Cable 690, and Ridgid R24002 are popular pairings and ship with most router table compatibility plates. For heavy-duty work like raised-panel doors, a 3.25 HP router paired with a router lift is the standard pro setup.
Conclusion
For most home shop owners, the Bosch RA1181 is the safest pick among the best router tables for home shops, because it combines a flat aluminum top, a strong fence, and a long track record of reliability. Budget-focused buyers should start with the RYOBI A25RT03, and small shops that need to fold the table away between sessions should grab the Bosch RA1141. Cast iron fanatics and serious cabinetmakers will get the longest service from the Bench Dog ProMAX with a router lift.
Pick the table that fits your shop space and your router, not the table with the most accessories. Then add one featherboard, a good dust collection setup, and a quality bit before your first serious project. With those three additions, any of the eight router tables in this guide will serve a home shop well for years. Updated for 2026.